RD52.1-4B-075-D-V1-FW

Product Description

The RD52.1-4B-075-D-V1-FW is a new generation drive controller produced by Rexroth Indramat for automation control in the industrial servo system. This drive controller is a very effective device that is renowned for its ability to operate smoothly in industrial conditions considered unfavourable for conventional drive controllers. The RD52.1-4B-075-D-V1-FW features a modular housing that is produced according to the IP20 protection class, this means it is completely protected from the penetration of any solid material with an external diameter larger than 12 millimetres. However, the enclosure of the RD52.1-4B-075-D-V1-FW drive controller offers it no protection against the penetration of water and very small solid particles, for optimum protection, the controller should be installed in an external circuit that meets the IP56 protection class. The RD52.1-4B-075-D-V1-FW is compatible with both synchronous and asynchronous motors; thus it can be operated in a broad range of industrial production systems.

The RD52.1-4B-075-D-V1-FW industrial drive controller can generate a power output as high as 116 kilowatts. The controller connects to the mains through a three-phase electrical connector, this connector provides it with a high power desist it requires for optimum operation in the servo system. The RD52.1-4B-075-D-V1-FW requires a supply voltage that falls between the range of 380 to 480 volts, it can also generate an output frequency of about 250  volts.

The RD52.1-4B-075-D-V1-FW industrial drive controller also features a plug-through cooler which ensures that the heat in the controller is kept within the tolerated range. A brake chopper is also integrated into the housing of this drive controller, this chopper protects the drive controller by regulating the excess voltage sent into the circuit of the drive controller during the regeneration of the industrial motor. This product can be shipped globally with a one year warranty period from Wake Industrial.