RD52.1-4B-011-L-V1-FW

Product Description

The RD52.1-4B-011-L-V1-FW drive control offered by Bosch Rexroth must be connected to the encoder using only the manufacturer’s encoder cable. The control can get damaged because of an incorrect supply voltage. The product is connected to the motor using its X2 connecting point. This device is operated and parameterized using the user panel and other interfaces. The unit has a fault memory that stores the last 10 faults in memory locations S0 to S9. The S0 location and S9 location store the most recent and oldest faults. The supply voltage of the control can be switched with the help of the S5 jumper present on the control and logic board.

This product displays a warning message on its display when there is a critical operating condition. The device incorporates an LED display that lights up in green when it is ready to power up. The same LED display is illuminated in red if there is a fault in the operating condition. The unit is parameterized with the help of menu prompts on its user panel. Its parameters can be changed only using a password. The control comprises power terminals that have to be connected only as per the instructions in its documentation. This control is accompanied by backup support for one year.

The drive control commissioning is supposed to be commissioned only after making sure that its busbars and cables have been connected properly as intended. The product can use its copy function to commission multiple controls. This device comes with an internal relay with two positively driven contacts. The unit cannot be turned ON without acknowledging the fault when it shuts down due to a fault. The control has AL electrolytic capacitors functioning like DC link capacitors. This RD52.1-4B-011-L-V1-FW control can be dispatched through a trustworthy logistics partner with a well-established worldwide network.