RD51.3-8C-030-L-V1-FW

Product Description

The RD51.3-8C-030-L-V1-FW is a state-of-the-art industrial servo drive produced by highly trained engineers of Rexroth Indramat. This servo drive is widely renowned for its high durability and ability to control the operation of synchronous and induction motors over a broad speed range. The RD51.3-8C-030-L-V1-FW industrial servo drive has a very high service life, under normal operating conditions, it can operate for more than five years without breaking down. This operation of this industrial servo drive does not lead to the emission of a high amount of noise, thus the servo drive can be operated at any time of the day. The installation, configuration, and general operation of this industrial motor should be carried out in accordance with the instructions in the drive’s documentation, failure to obey these instructions can cause dangerous movements in the servo system.

The RD51.3-8C-030-L-V1-FW industrial servo drive contains a built-in fan that helps to keep the heat generated by the controller within the tolerated range thus protecting sensitive components of the drive from overheating. At a rated current of 56 Amperes, this industrial servo drive can generate a power output of about 30 kilowatts.

The RD51.3-8C-030-L-V1-FW servo drive connects to the motor through two major types of electrical cable; the motor feedback cable and the power cable. The motor feedback cable is used in the transfer of digital signals between the motor’s encoder and the drive controller while the power cable is used to send controlled electrical energy into the industrial motor. All electrical cables used with this servo drive must be properly shielded and must not be longer than 75 meters. The total weight of this industrial servo drive is about 36 kilograms. This product can be shipped globally with a one year warranty period from Wake Industrial.