RD51.1-5N-037-W-V1-FW

Product Description

The RD51.1-5N-037-W-V1-FW Bosch Rexroth vector control has a rated motor output of 37kW. This control works as part of a 3-phase drive system by the same manufacturer. The product comes integrated with a start inhibitor function to implement protection against accidental starting of the connected motor. This device executes a self-test after the initialization is complete. Its main contactor shuts down when there is a fault and the power section also gets turned OFF. The fault message is highlighted in the display of the operator panel. The unit is sized at 530 x 180 mm. It does not have any inbuilt brake chopper.

The control deploys liquid cooling mechanism. The product is accompanied by an external 24V standby external power supply. This external power supply may get damaged due to the overloading of its components. The device depicts an output frequency ranging between 0Hz and 250Hz. It has a radio interference suppression level or noise immunity of A1 in accordance with EN 55011 / EN 61800-3 specifications. The unit weighs 28kg. The vector control cannot be turned ON after shutdown due to a fault until the fault is acknowledged by pressing the ESC key on the control panel. Its current must be at least one-third of the rated motor current in the steady-state condition. The RD51.1-5N-037-W-V1-FW control is eligible for international shipping.

The product features a copy function that can be used to commission multiple converters. This device has a minimum resistance value of 7 Ohms. The unit supports C size class. It has a 22.5mm mechanical grid pattern that allows adjacent mounting of multiple units without any space in between. The coolant used for cooling the control must never be mixed with other antifreezes. The relative humidity of the control is to never exceed 90%. The product depicts reduced performance if the setup elevation limit is exceeded. The vector control is equipped with a year’s Wake Industrial warranty.