RD51.1-5N-030-L-C1-FW

Product Description

The RD51.1-5N-030-L-C1-FW drive control offered by Bosch Rexroth should be used only as intended to avoid product damage, electric shock or personal injury. The product may have high electric voltage due to incorrect connections. This device must be correctly and properly stored, transported, assembled and installed properly for safe and optimal operation. The unit is meant to be cooled for at least 10 minutes after switching it OFF and before touching it. Its heatsink, resistors and housing tend to become very hot during operation. The control comes with 51 line code. The product operates like a converter with 3 x 500VAC +/-10% nominal connecting voltage.

This device comprises an additional RZ DF connection. The unit features a 56A rated current at 4kHz pulse frequency. The electronic boards or modules of the control are to be placed only on conductive surfaces. The product should not have any structural modification. It is integrated with a line reactor and radio interference suppression filters to minimize harmonics in the line supply. This unit is ideal for implementation in chemical, process, hoist and conveyor technologies. The control must at no time be used when there are extreme temperature fluctuations. The product has a power rating of 30kW.

The drive control can operate at a maximum temperature of 55°C with derated data. The product comprises C size class. The device portrays IP 20 protection rating according to EN 60529 specifications without connection terminals. It weighs 36kg at 4kHz. The unit depicts a minimum resistance value of 8.8 Ohms. The air surrounding the environment where this product is installed must be free of electrically conductive or aggressive gases that impact its functioning drastically. The device is designed to support a maximum installation elevation of 1,000m over sea level with rated data. The RD51.1-5N-030-L-C1-FW control is shipped through freight carriers such as UPS and USPS with a warranty for one year.