Product Description
The RD51.1-5N-022-L-DF-FW drive control from Bosch Rexroth features U/f characteristic control. This drive control belongs to the RD product group of controls from the manufacturer. The installation, service and/or use of the product is always to be done only after reading the associated documentation. The device should be worked on only by trained and qualified personnel. It is designed for installation in commercial machinery. This unit should always be powered up only after the associated motor and housing have a permanent grounding connection in accordance with the connection diagram. The control has two pulse frequencies of 4kHz and 8kHz. The power connection of the product must have isolation using an emergency stop circuit so that there is no unplanned startup.
The device has a design code of 1. The unit may pose a risk of injury due to improper handling. It acts as a three-phase drive system when used with an induction motor or synchronous motor. This control is in full compliance with EMC directives regarding noise emission and noise immunity. The product is fitted with a type label that details the input and output voltage ratings, frequency ratings and current ratings. The device must neither be installed nor operated in damaged or faulty condition. The unit operation is intended to take place only with accessories and components approved by the manufacturer as well as in the explicitly specified combinations of components and software.
The product should be programmed before the commissioning process so that the motor can perform the application-specific functions. This device encompasses AL electrolytic capacitors to function as DC link capacitors. These capacitors have a maximum shelf life of two years under storage without power at a temperature of not more than 40°C. The unit supports a maximum relative humidity of 90% without condensation on its surface. The RD51.1-5N-022-L-DF-FW control can be shipped globally with a one year warranty period from Wake Industrial.