RD51.1-5B-011-L-CF-FW

Product Description

The RD51.1-5B-011-L-CF-FW drive control offered by Bosch Rexroth features forced air cooling. The product should at all times be operated in a dust-free place. The dust-laden air in the surroundings must be filtered out. The device dissipates heat to the surroundings and produces power loss in the surroundings. The performance of the unit tends to gets reduced when its installation altitude exceeds the maximum specified elevation. Its assembly must be done perpendicular to a level surface. The servo control incorporates cooling air entry through its bottom and hot air discharge from the top. The product is mounted between the heat exchanger and the line filter over the mounting plate.

The device operates at a high voltage level. The unit has chances of having a dangerous voltage for up to five minutes after its power has been turned OFF because of the DC link capacitors. This drive control features a radio interference suppression level or noise immunity of A1 in compliance with EN 55011 / EN 61800-3 specifications. There must be no condensation at the place of installation of the product. The device supports a 22.5mm mechanical grid pattern. It can be installed next to another control unit without any space in between.

The terminals of this product may tend to be live even if its associated motor is in standstill mode. The device can be parameterized and operated using an RDwin PC user interface or through a user panel. It also features two standard serial interfaces installed on the logic and control board. Its parameters can be changed using the Prog key on the user panel and pressing the Enter key for confirmation. This unit depicts a copy function to assist in transferring the parameter set from one control to another. The drive control is available with a warranty for a year and is shipped in custom military-grade packaging from Wake Industrial.