RD51.1-5B-001-L-V1-FW

Product Description

The Bosch RD51.1-5B-001-L-V1-FW is a converter based drive controller. The converter on the RD51.1-5B-001-L-V1-FW is rated for 500 Volts AC input. The converter includes a built-in brake chopper. The power output rating of the drive system is 1 kilowatt. The housing of the drive system is IP20 rated. This rating indicates that the housing provides protection from solids with 12 millimeter dimensions (such as human fingers). The drive does not provide protection from dust or from moisture. A control cabinet with the desired protection rating can be used to install the drive. Height of the drive is 440 millimeters and the width is 90 millimeters. M6 screws are required for mounting the drive. Recommended ambient conditions for drive operation include maximum 95% humidity, 0 to 1000 meters altitude and 0 to 40 degrees Celsius temperature.

A minimum clearance of 100 millimeters must be maintained on the top and bottom sides of the unit to ensure that the cooling air flow is unrestricted. The cabinet used for drive mounting must be dimensioned to ensure that the cooling air requirements are met. When unused, the drive can be stored in areas that are clean and where the temperature is maintained between -25 and 70 degrees Celsius. Cooling method used for the RD51.1-5B-001-L-V1-FW is forced air cooling. This cooling method depends on fans and blowers that force air over the heated surface of the drive controller. The RD51.1-5B-001-L-V1-FW supports 24 Volts standby power. The radio interference suppression rating of the drive as per EN 55011 is A1. The purpose of the radio interference filters is to minimize harmonics that could be fed back into AC line supply. The weight of the RD51.1-5B-001-L-V1-FW is approximately 6.5 kilograms. This product can be shipped globally with a one year warranty period from Wake Industrial.