Product Description
The RD51.1-4N-022-L-C1-FW drive control from Bosch Rexroth features U/f curve characteristics. This drive control must be used only after reading the associated instructions to avoid the risk of property damage or personnel injury. This product tends to have high electric voltage due to incorrect connections. The device belongs to the RD product group of such offerings from the manufacturer. The unit is meant to be installed in commercial machinery. Its electrical connection points must not be touched when the power is switched ON. The drive control has a leakage current of over 3.5mA. The product should be brought to standstill mode before entering the danger zone.
This device features components that tend to get destroyed due to electrostatic discharge. The unit has a design code of 1. It is capable of functioning as an inverter. The drive control has an output frequency ranging between 0Hz and 250Hz. The product is an integral part of the manufacturer’s RD 500 three-phase drive system, which is used with several induction and synchronous motors. The device incorporates a modular software and hardware design. The unit encompasses a removable user panel that has a parameter copy function. It does not have any inbuilt brake chopper. This RD51.1-4N-022-L-C1-FW control is available with a one-year warranty from Wake Industrial.
The product supports Synchrolink or peer-to-peer coupling for rapid communication among multiple drives. The device has a peak power rating of 37kVA for 60s at 4kHz pulse frequency. The unit is designed to operate at an ambient temperature of 0°C to 40°C. It is fitted with a type plate that depicts its type designation, firmware and input as well as output voltage rating, current rating and frequency rating. This product must be put to use only as intended by the manufacturer. The device should not be utilized in either a damaged or defective state. It is possible to dispatch this drive control to any desired destination.
Wake Industrial Warranty
