RD51.1-4B-315-R-V1-FW

Product Description

The RD51.1-4B-315-R-V1-FW drive control produced by Bosch Rexroth must not be tampered with to avoid personnel injury or product damage. This control can cause the machine in which the installation is done to have a very hot surface due to improper functioning. The product features 4kHz as well as 8kHz pulse frequencies. The device is not supposed to be used if the associated documentation is not understood properly. The unit must comply with the 89/392/EC machine directives. Its operation is not permitted if the application fails to comply with the national EMC regulations. The control operates with a motor that has a 200kW rated output.

The product should never be used with residual current operated protective equipment. This device has an output frequency ranging from 0Hz to 250Hz at a pulse frequency of 8kHz. The unit can incorporate a safe optoelectronic coupler or an isolating transformer for safe isolation. It has chances of moving dangerously when the associated motor has defective components. The control has to be in standstill mode during access or entry into the danger zone. This product helps to control the brake of the motor. This RD51.1-4B-315-R-V1-FW control must not have an electrical power connection due to a long storage period.

The drive control renders 540A rated current at 4kHz pulse frequency. The product encompasses electronic boards that are to be kept only on conductive surfaces. The device is compatible with multiple induction and synchronous motors from the same manufacturer. The unit can be adapted to a particular drive application easily because of its modular design. It is integrated with a mains filter. The control has IP 20 protection rating in accordance with EN 60529 specifications without connection terminals. The machine featuring the product must not be put into operation if the emergency stop circuit fails to function. This control is transported to its destination through trustworthy freight carriers.