RD51.1-4B-045-L-CF-FW

Product Description

The RD51.1-4B-045-L-CF-FW vector control manufactured by Bosch Rexroth features V/f characteristics. The control comes with 52 line code and 1 design code. The product is not intended to be installed, used or serviced without reading and understanding the associated documentation. The device may cause personal injury or product damage if it is used inappropriately. It must be used in adherence to the safety requirements and regulations for the specific application. The product is supposed to be installed in commercial machinery. This device should be operated only if the application adheres to the national EMC regulations.

This vector control operates like a converter that is equipped with a built-in chopper. The three-phase device comes with 380VAC to 480VAC +/-10% nominal connecting voltage. The unit supports forced air cooling type cooling mode. Its housing must always be permanently grounded before powering up. The product may move dangerously due to faulty control or a problem with the connected motor. The vertical axes of the device have to be secured against slipping or falling off after the motor power is switched OFF. The unit has very hot housing during operation. This RD51.1-4B-045-L-CF-FW control is backed by a one-year warranty from Wake Industrial.

The product installation must be done taking the safety regulations and general instructions into consideration. The device is not to be opened or disassembled in a pressurized state. The unit features components that can get destroyed due to electrostatic discharge. It has a radio interference suppression level or noise immunity of A1 in compliance with EN 55011 / EN 61800-3 specifications. The control has a weight of 36kg. The chopper in this product has a minimum resistance value of 5.8 Ohms. The device is available for international shipping to any address across the world based on your preference.