Product Description
The RD51.1-5B-037-L-V1-FW drive control should be assembled perpendicular to a level construction area. The product operates at a high voltage level. The Bosch Rexroth device may have a dangerous voltage for five minutes even after its power is switched OFF because of DC link capacitors. The unit has chances of featuring live control and power terminals even when the related motor is in standstill mode. Its motor connection is located below the housing. The control also features the brake resistor, DC link and line supply terminals at its top. This product deploys feedback for the current filter at the U6, V6 and W6 terminals.
This device has a relative humidity of not more than 90% at the installation location. The unit should have no condensation on its surface. It should be ascertained that there is no restriction to the airflow of its fans. The drive control must always be positioned at a reasonable distance from heat-sensitive devices. The product is always meant to be mounted in a control cabinet. The line supply, signal, power and motor cables of the device have to be placed at a minimum distance of 20cm from each other to avoid mutual interference. It is to be made sure that grounded barriers are used between signal and power cables.
The product operation should not be allowed when there is extreme temperature fluctuation. The device must incorporate a protective conductor with a minimum of 10mm2 cross-section. It should support a starting lockout mechanism to prevent unplanned startup. The power supply and motor connection terminals of this unit have a cable-cross section of AWG 20 to 10. The X2 connector of the control is used to connect the motor through the U, V and W terminals. This RD51.1-5B-037-L-V1-FW is delivered through logistics partners like DHL and FedEx with a warranty backup for one year.
Wake Industrial Warranty
