RD43.1-3R-185-W-NN-FW

Product Description

The RD43.1-3R-185-W-NN-FW drive control produced by Bosch Rexroth is an integral component of the manufacturer’s RD 500 series of the three-phase drive system. This product is capable of having a high discharge current as well as high voltage due to inappropriate usage. The device is supposed to be worked on only by personnel who are qualified and trained to work on it. Its protective conductor should have a permanent connection as per the connection diagram before the powering up action. The unit must be installed following the general safety and construction regulations pertaining to electrical installations. It may show signs of dangerous movement at any point of time during operation.               

The device must never be put to use between remote control, high frequency and radio equipment. The unit comes with a four-line graphical display. It supports Synchrolink or peer-to-peer coupling to assist fast communication between multiple drives. The product might require the use of additional actuators and sensors to monitor and control the connected motor. This device should make use of only cables that have the manufacturer’s approval. This control must not function when there is an extreme temperature fluctuation. The product storage must be done in a clean and dry place.

This control is intended to be stored between -25°C and 70°C. The device installation must always be perpendicular to a level construction area. There should be at least a 100mm clearance distance above and below the unit for ensuring unrestricted cooling airflow. It has a dangerous voltage for a maximum of five minutes after the power is turned OFF. The product comes along with a direct connection between the protective earth and reference ground. The current of the device must be checked to ensure that it is nearly one-third of the motor rated current in a steady-state condition. We can send the control to your address anywhere across the globe irrespective of the country you live in. This product can be shipped globally with a one year warranty period from Wake Industrial.