Product Description
Rexroth Bosch Indramat GmbH needs no introduction for manufacturing futuristic motion control systems. The company has experience of decades in the field of motion and logic control. And Rexroth Synax 200 system is a fine example of combining up to 40 drives in one platform. Among many components, the RECO02 I/O modules are quite important for the Synax200 systems. The part number RMC02.2-0E-4A belongs to the RECO02 family of local I/O components and follows design 2 of the Rexroth Synax 200 systems.
The part number RMC02.2-0E-4A is an output module meant extensively for providing output connectivity. As per the description code, the RECO output module by Rexroth Indramat features no input connector while there are 4 analog output connectors, X3. Each analog output connector offers adjustable current output in the range of 0A and 20mA. The adjustable voltage output of each output connector ranges between -10V and 10V. The output connector offers 2 analog grounding pins (GND A) and features an extra pin if additional screening is required. For secure and short-circuit-proof wiring, the voltage output pin should be connected to the Aktor with resistance greater than 10 kilo Ohms. Moreover, the 0A - 20mA current output should be connected to the actuator with resistance varying between 0 and 250 ohms. The current output and voltage output should go parallel at 2047 increments. The converter for output value has conversion time less than 5 microseconds and its resolution is 12 bits. At 10 Volts and 20 mA the converter offers per increment resolution of 9.77 micro Amperes.
It is recommended that modules like RMC02.2-0E-1A requires extensive knowledge and understanding of the PPC and PLC systems. Manufacturer will not be liable for any damages due to inappropriate use. Care must be taken while installing the output module.
Wake Industrial Warranty
