RAC 2.2-150-380-A0I-Z1

Product Description

The RAC 2.2-150-380-A0I-Z1 Bosch Rexroth main spindle drive controller should always be stored in a dry place that is free of impact and dust. The drive controller must not be tipped or dropped during storage and transport. There should also be no load on the product when it is stored and transported. The device is installed inside the control cabinet using lifting equipment and mechanical mounting accessories. The mounting frame should be removed from the controller’s backwall and fitted on to the backwall of the mounting plate or control cabinet. The mounting frame features all the sealing rings and threads required to support the controller securely.

The plugin module must be fitted on the device and secured in place using a knurled screw before the drive controller is commissioned. The motor controlled by the product should have its grounding done on the controller. The control panel is equipped with a display to help in diagnosing the drive faults. The master switch of the controller must be secured against getting turned on when any work is done on the main spindle drive controller. The device should be connected as per the wiring plans. The unit must be repaired only by trained or authorized personnel.

The main spindle drive controller features an incremental encoder output at its X13 connector. This output can be used for position control applications through a CNC control during tapping, screwing or C-axis operation. The product is not safeguarded against deliberate penetration. The average relative humidity in the surroundings where the device is installed must never cross 70%. There should be no condensation or water formation on the unit. The inside of the control cabinet has a protection rating of IP 54 if the drive controller is mounted in adherence to the guidelines. The RAC2.2-150-380-A0I-Z1 product comes with a one-year warranty.