Product Description

The PSI 6300.624 L1 medium frequency inverter by Bosch Rexroth is listed among similar offerings by the manufacturer in the PSI series. This frequency inverter is prone to damage because of overload. The product must be automatically separated from the power supply when there is a fault in compliance with EN 62135 specifications. This device must be put to use only after reading and understanding its document. The unit is meant to be handled only by qualified and trained personnel. It must be ensured that there is a harmonic load in the mains system when the inverter is operated. This inverter is meant to be mounted only in the specified orientation. The product cannot be used without a control cabinet. This device is meant to be operated only with an appropriate fusing of the mains system. The unit is designed exclusively for industrial use. It must be properly grounded before turning on the power supply. This inverter is integrated with DC link capacitors. The product needs a manual activation to be carried out for its compressed air supply system. This product is equipped with three phases. The device has live connecting points during and immediately after its operation. This unit should not be operated outside the specified ambient conditions. It must be taken care to ensure that the frequency inverter does not get overloaded. The inverter is intended to always be operated within the permitted mains voltage range. This product is connected to the three terminals of the transformer through its three phases.