Product Description

The NAM04.2-480-0650-NE-120 Bosch Rexroth line conditioning module has a nominal current rating of 650 A. This conditioning module depicts mains acquisition. The product has a line code of 4. This device has an output voltage rating of 300 V. This device delivers the DC bus voltage to supply power to the drives in a drive system. The unit is compatible with the manufacturer's KDV power supply modules. It encompasses an LED display that makes the troubleshooting process an easy task to accomplish. This module supports operation under humid conditions. The product has reduced output when the rated ambient operating conditions are exceeded. This device operates at an input voltage of 3 x 380 to 460 VAC with a frequency of 50/60 Hz. The unit is compatible with main and servo drives that portray a continuous mechanical power output rating of up to 24 kW. It uses a wired ribbon cable for communicating with the drive. This module must be allowed to cool down after it has been disconnected from the power supply to avoid the possibility of burns. The product features an input terminal identified as U1-V1-W1. This device incorporates various monitoring functions. The conditioning module can be connected to an input inverter choke of the HNL series from the manufacturer. This unit does not support operation under water. It should never be used outside a control cabinet. The product has an IP 10 protection class according to DIN EN 60529 specifications. This device has a 1L+/2L+ choke terminal. The unit is designed for industrial use and is meant to be operated only as intended. It may trigger unfavorable consequences if it is not handled properly.