Product Description
The Bosch Rexroth MTS-P01.2-D2-B1-P1-E1-NN-FW is a PLC module. It is available in an ISA-bus plug-in card format and can be installed in a commercially available industrial PC or a BTV20/30. Performance of MTS-P01.2 modules is approximately 2 to 2.5 times less than that of MTS-P02.2 modules. A MTS-P consists of a basic unit with ISA-Bus and plug-on modules such as serial interfaces, I/O modules and fieldbus connections. Every MTS-P01.2-D2-B1-P1-E1-NN-FW includes a BT bus which can be used to interface with operator terminals located up to 50 meters away. Each MTS-P01.2-D2-B1-P1-E1-NN-FW has 16 TTL input and 16 TTL outputs which can be used to connect to keys and switches on an operator terminal such as the BVT20. Communication with operation units and decentralized I/O units can be accomplished by means of serial interfaces and fieldbus connections.
Weight of the MTS-P01.2-D2-B1-P1-E1-NN-FW is 0.3 kilograms and its dimensions are 22 x 145 x 295 millimeters. The recommended range of temperature for module operation is from 0 to 50 degrees Celsius. The recommended range of temperature for module storage is from -20 to 70 degrees Celsius. During operation the relative humidity should be below 75% and condensation should be avoided. During storage the relative humidity should be below 95% and condensation should be avoided. The MTS-P01.2-D2-B1-P1-E1-NN-FW can be operated at different input voltages including +5 Volts DC, +12 Volts DC and -12 Volts DC. Peak current draw of the MTS-P01.2-D2-B1-P1-E1-NN-FW is 0.6 Amps. Integrated RS-232 / RS-422 / RS-485 serial interface is available on the MTS-P01.2-D2-B1-P1-E1-NN-FW. MPS modules are available in different configurations. Module installation and configuration should be performed by trained personnel who are aware of relevant safety precautions. This unit can be shipped globally with a one-year warranty period from Wake Industrial.