Product Description
The Rexroth MTC-P01.1-M1-A1-A1-A1-A1-FW is a CNC controller. It is available in an ISA bus module format that is designed for installation inside a suitable industrial computer. It belongs to the MTC200 product line. As per the type code for the device, the type for the MTC-P01.1-M1-A1-A1-A1-A1-FW is 1 and the series is also 1. The module comes with one integrated axis processor. The module communicates with drives over fiber optic cables that interface with the module through the SERCOS interface which is located on the module. Additional axis processors can be added to increase the number of drives that can be controlled. The MTC-P01.1-M1-A1-A1-A1-A1-FW supports three additional axis processors and occupies 4 slots on the ISA bus. Capacity of RAM on the module is 1 Megabyte. The MTC-P01.1-M1-A1-A1-A1-A1-FW module is an export restricted module which places limitations on the number of axes that can interpolate with each other.
A version of the MTC-P01.1-M1-A1-A1-A1-A1-FW without export restrictions is also available. On that module there are no restrictions on the number of axes that can interpolate. A maximum of 8 drives can connect to a single fiber optics loop that terminates on one SERCOS interface on the MTC-P01.1-M1-A1-A1-A1-A1-FW. The communication between the CNC module and the computer takes place over the ISA bus. The power supply for the module from the computer is also routed over the ISA bus. Communication between the MTC-P01.1-M1-A1-A1-A1-A1-FW and the SPS takes place over the Indramat local bus. For this purpose, both modules need to be connected through a 50-way ribbon cable. Rexroth does not recommend storing the module for more than 6 months as doing so can lead to battery discharge and loss of user data. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
