Product Description

The MSS162B-0200-FA-N0CN-NNNN is an excellent synchronous stator commercialized by Rexroth Bosch under the IndraDyn H series. It exhibits high-speed loading capabilities and employs a special liquid cooling system during operation. The integrated cooling system allows the stator to maintain a relatively low temperature even in continuous mode of operation. Specifically, MSS162B stators under the IndraDyn H series have a thermal time constant of 3.5 minutes. This constant implies that the stator has great heat dissipation qualities and achieves thermal equilibrium quite quickly. When operated with a 1N rotor, this stator has a moment of inertia of 0.014 kg(m^2). For a 2N rotor, the corresponding moment of inertia is 0.016 kg(m^2).

Throughout its lifespan, the MSS162B-0200-FA-N0CN-NNNN utilizes an axial connector cable for its cooling system. At most, the stator’s cooling system dissipates 550 watts during operation. The permissible temperature rise for the coolant’s temperature should be 10 Kelvin at any point in time. Overall, the MSS162B-0200-FA-N0CN-NNNN has eight poles, spaced 45 degrees apart. Like all other MSS stators, this unit can only tolerate an ambient temperature between 0 and 40 degrees Celsius. Based on documentation, this stator must not be exposed to condensing environments. Since this unit does not come with a frame or housing, the protection category is IP00.

Without the rotor, the MSS162B-0200-FA-N0CN-NNNN has a total mass of 22 kilograms. At rated or nameplate conditions, this stator can induce enough magnetic field to cause the rotor to run at a synchronous speed of 2000 rpm. At higher DC bus voltages, the MSS162B-0200-FA-N0CN-NNNN’s speed can be increased accordingly. At 750 VDC bus voltage, this particular unit can maintain a peak synchronous speed of 16,500 rpm.