MSM031C-0300-NN-M5-MH1

Product Description

The MSM031C-0300-NN-M5-MH1 IndraDyn S motor supports installation in any position although it is intended for flange mounting. This Bosch Rexroth synchronous motor must be transported between -20°C and 80°C. It supports a climatic class of 2K3 for transportation. The mounting screws of the product have diameters of 3.4mm, 4.5mm, and 6mm. The device uses a battery box for buffering the data of the encoder when the voltage is disconnected. The battery must be changed after five years. The unit comes fitted with an absolute encoder. The motor is noted for its compact construction and high dynamics. The play of the holding brake is +/-1° or less, after the movement of the product.

The thermal coupling of the device on the machine changes when the gearboxes are mounted. The heat dissipation of the unit through the flange reduces when a gearbox is mounted. Its type-plate highlights several details such as the date of manufacture, degree of protection, rated power, current and voltage, insulation class, and frequency to mention just a few. The S6 operating mode of the product is available only if the duty cycle is less than or equal to 100%. The rotor has a moment of inertia of 0.0000260kgm². There must be no condensation or icing on the motor during storage and transportation.

The device should be stored between -20°C and 60°Cand features a 1K3 climatic class during this period. The unit supports a wire cross-section of 0.75mm². Its mounting screws with 6mm diameter have a tightening torque of 6.1Nm. The standstill motor has a continuous current rating of 2.60A at 60K. The holding brake of the product features an external 24V +/-1.2V rated voltage supply as well as a current rating of 0.36A. This brake has an external holding torque of 1.27Nm. The MSM031C-0300-NN-M5-MH1 can be sent to your address in any country with warranty support for one year.