Product Description

The Bosch Rexroth MSM030C-0300-NN-M0-0G1 synchronous servomotor cannot be operated with an appropriate drive controller. This servomotor does not require any maintenance if it is used as intended by the manufacturer. The product has a short frame length and a minimum size for its flange. This device is noted for its high power density. The unit should not be operated on a supply network with a higher than the specified nominal voltage. Its surface must always be free of condensation and icing. This motor has a relative humidity ranging between 5% and 95% during its operation, transportation, and storage. The product experiences a reduction in its output when the operating temperature ranges from 40 °C to 55 °C. This device can at no time be installed at an elevation higher than 4000 m above sea level. The unit can be installed in the upright position with the shaft facing either upward or downward. It deploys a self-cooling action. This motor must be connected using only the readymade cables supplied by the manufacturer. The product is manufactured using resource- and energy-optimized production processes. This device uses plug connectors for its encoder and power connections. The servomotor has an overvoltage category of III according to IEC 60664-1 specifications and a 2 degree of contamination as per EN 50178 specifications. This unit portrays climatic classes of 2K3 and 1K3 during its transportation and storage respectively. Its holding brake is controlled by the drive controller. The product comprises bearings with a lifetime of 20,000 operating hours when it is operated within the limits for radial and axial loads. This device has an external power supply for its holding brake.