Product Description

MSK101F-0202-NN-S3-AG0-NNNN is a Bosch Rexroth servo motor. It is part of the MSK synchronous motor product line. The motor has a standard housing. It is designed for convection cooling. Rated output is possible when the temperature is between 0 and 40 degrees Celsius and the site elevation is between 0 and 1000 meters. Output of the motor derates if either the temperature or elevation are outside these specified ranges. The permitted temperature for motor transport is -20 to 80 degrees Celsius and the air humidity is 75%. The permitted storage temperature is -20 to 80 degrees Celsius with 5 to 95% relative humidity. The MSK101F-0202-NN-S3-AG0-NNNN motor is equipped with a capacitive singleturn encoder. Interface on the encoder is Hiperface. Maximum current consumption of the encoder is 50 milliamps.

Supply voltage range for the encoder is 7 to 12 Volts. The encoder permits absolute, indirect position recording within on rotation. The motor has a plain shaft with sealing ring. Protection rating of the standard motor housing is IP65. The main power connection is on side A of the housing. Visual inspection is required if the motor is kept in storage for more than 1, 12 or 60 months. The electric shafts should be checked for corrosion if the motor is kept in storage for more than 12 or 60 months. The motor should be run without load at 800 to 1000 RPM if kept in storage for more than 12 or 60 months. The insulation resistance should be checked if MSK motors are kept in storage for more than 12 or 60 months. Encoder and bearings should be exchanged if MSK motors are kept in storage for more than 12 or 60 months.