MSK101E-0300-FN-S3-AG0-NNNN

Product Description

Bosch Rexroth products offer cutting-edge technology, and they are pre-tested for operational performance and quality before release. The company is renowned for its exploits in mainstream industrial automation devices, and several of its rollouts provide much-needed solutions in the industry.

The MSK101E-0300-FN-S3-AG0-NNNN is an MSK synchronous servomotor in the Rexroth IndraDyn S product category. Servomotors in the IndraDyn S are developed by combining recent technology and past experience to create and set new operating standards in the automation industry. In addition, these motors are extreme precision, high dynamics, compact design, and high torque density. Depending on the application, Rexroth's MSK line of motors can be used as main, rotary, linear, or kit motors. Supplementary control systems may be required for motor control and monitoring. The maximum torque of the MSK101E-0300-FN-S3-AG0-NNNN is 231 Nm, and during operation, its maximum current is 187.4 A.

The torque constant of the MSK101E-0300-FN-S3-AG0-NNNN is 1.85 Nm/A at a temperature of 20 degrees C. At the same temperature, this MSK model's constant voltage and winding resistance are 113.8 V/min^-1 and 0.11 Ohm, respectively. It also features a winding inductivity of 1,960 mH and a leakage capacitance of 16.7 nF. This motor is without a holding brake, and its corresponding moment of inertia is 0.01380 kgm². Its insulation class and protection class are F and IP 65. Before using the MSK101E-0300-FN-S3-AG0-NNNN, ensure that all conditions for proper use are met. It must be assembled, installed, and powered in compliance with the appropriate document. If the prescribed temperature requirements are not satisfied, then MSK motors should not be utilized. Extreme temperature swings or extremely high maximum temperatures are all examples of this.