MSK101E-0200-NN-M2-BP2-RNNN

Product Description

The MSK101E-0200-NN-M2-BP2-RNNN synchronous servomotor provided by Bosch Rexroth portrays a fixed encoder connector with pins type contact. This motor is recommended for use along with the manufacturer’s cables and accessories. The product has an absolute air humidity ranging between 1g/m³ and 29g/m³ as per DIN EN 60721-3-3 specifications during operation. The device features a maximum allowed axial shock load of 100m/s² and a maximum permitted radial shock load of 200m/s² for 11ms. The unit has IP 67 degrees of protection for its connectors with a properly connected cable socket. Its plug connections must be disconnected by pulling the plug and not the cables.

The motor housing must not be coated with an additional varnish when it is used in hazardous areas as this can influence the surface characteristics negatively. The product has an output keyway shaft that renders form-locking torque transmission with constant direction. The device incorporates materials with high resistance to chemicals and oils for its shaft sealing ring. The unit mounting can be done in vertical as well as horizontal orientation. Its sealing ring functions like an abrasive seal. The motor installation has to be done such that the radial shaft seal and output shaft have no direct contact with the machining medium.

The product installation altitude must not exceed 3,000m over sea level. The device experiences a 0.5°C/min temperature change rate during operation. The unit has reduced concentricity and alignment tolerance in accordance with DIN 42955 / IEC 60072-1 specifications. Its maximum supported radial force depends on the force acting point and the shaft breaking load. The motor portrays a Level A vibration severity grade in compliance with EN 60034-14 specifications. The product comprises a DS M12 centering hole on its output shaft. The device has an overall length of 511mm. This motor tagged by warranty for one year is delivered to any international address.