MSK101E-0200-NN-M2-AP2-RNNN

Product Description

The MSK101E-0200-NN-M2-AP2-RNNN synchronous servomotor offered by Bosch Rexroth encompasses an encoder with an EnDat 2.1 interface. This motor uses its holding brake in standstill mode to perform a drive-internal brake check. The product installation and/or operation must not happen in the damaged or defective state. The device operation cannot be undertaken even for a short time if its protective conductor is not securely connected as intended. The unit might cause dangerous drive controller movements due to wrong cable connection and/or operator errors. It is important to secure the vertical axes of the drive controller against dropping or falling after the motor has been turned OFF.

The motor must feature disconnection from the power supply when it is kept unused for a long time. The product might cause burns if its surface is touched when it is hot. The device needs protection against jamming and crushing by using appropriate measures. The unit handling must be done using safety shoes, goggles and gloves. It is designed for operating between 0°C and 40°C. This motor is grounded using a motor cable. The product features an electrically releasing holding brake and a keyway shaft. The device may explode when there is an explosive atmosphere for a long period.

The product features integration with a single-channel temperature monitor. The device is associated with a cycle duration of 10 minutes. The unit is balanced with a complete key. Its holding brake has a maximum connection time of 53ms and a maximum disconnection time of 97ms. The motor has a 10x8x70 key designed in accordance with DIN 6885-A specifications. This product’s speed and position are controlled by the drive controller using the current position of the motor. The gearboxes on the device should correspond to Ex-protection demands as per EG 94/9 directives. This MSK101E-0200-NN-M2-AP2-RNNN motor with backup support for one year can be sent across to any address.