MSK101D-0450-NN-S1-LG2-NNNN

Product Description

The MSK101D-0450-NN-S1-LG2-NNNN synchronous servomotor features its cable connector directed to its left. The Bosch Rexroth motor portrays a smooth shaft with a frontal centering DS threaded hole. The product supports the mounting and operating of gearboxes that adhere to the Ex-protection demands as per EG/94/9 directives. The device features a changed thermal coupling to the machine if transmissions are attached. The unit uses a fixed M58 flange socket with pins type contact for its power connection. Its connecting cables must not be loaded with torsion or tension. The motor supports a maximum installation elevation of 3000m over sea level with derated data.

The product portrays 95% high relative air humidity. This device features vibrations in form of sine wave oscillations in stationary use. The unit depicts a maximum allowed axial load of 10m/s². It fulfills Class 2M1 transport conditions as per EN 60721-3-2 specifications. The motor depicts IP 65 protection class for its output shaft and housing. This product supports vertical as well as horizontal installation. The device housing must not be coated with an additional varnish when it is used in hazardous areas. The unit features a shaft seal greased for life under normal conditions. Its shaft renders a very quiet running action.

The motor bearing may have premature failure due to mechanical damage. The product might have a shift in the position of its axis if its driving pinions have no axial fitting on the machine side. The device uses the holding brake to hold the axes in standstill mode and not as an emergency stop brake to stop the operation of the motor. The unit features heat dissipation through the heat conduction to the machine structure. Its temperature sensor issues a warning when the motor temperature reaches 140°C during its operation. This motor with a warranty for a year is dispatched globally to any address.