MSK101D-0450-NN-S1-AG2-NNNN

Product Description

The MSK101D-0450-NN-S1-AG2-NNNN synchronous servomotor manufactured by Bosch Rexroth has a standard design. This motor must be used only with accessories from the same manufacturer. The product might require additional sensors and actuators to be connected for controlling and monitoring it. The device connection should be done only with a drive controller programmed before startup so that the motor performs the application-specific functions. The unit must never be operated underwater. It tends to have high electric voltage due to incorrect connection. This motor comes fitted with protective covers and sleeves that are to be removed only just before it is mounted it.

The product may need up to 140 minutes of cooling time after turning OFF the power supply. The device is not to be disconnected or opened in the de-energized state. The unit must incorporate mechanical fastening for the cable ends to prevent the danger of explosion. Its holding brake is controlled by the drive controller. The motor portrays a discharge current over its housing parts if the grounding connector in its motor cable is not connected. This product must undergo an acceptance test every time it is changed. The device is UL Listed and CSA Certified.

The motor houses a smooth and plain shaft fitted with a radial shaft sealing ring. Its encoder features a supply voltage rating of 7Vcc to 12Vcc. The product supports an ambient operating temperature of 0°C to 40°C. The three-phase device is made of materials like steel, brass and aluminum. The unit must necessarily be cooled down before maintenance. It is essential to wear safety gloves for undertaking repairs. The motor should not be worked on when the machine in which it is installed is running. This MSK101D-0450-NN-S1-AG2-NNNN servomotor with one-year backup support is transported to the preferred address in custom military-grade packaging.