MSK101D-0450-FN-M2-AP2-RNNN

Product Description

The Bosch Rexroth MSK101D-0450-FN-M2-AP2-RNNN is an industrial motor. It belongs to the category of synchronous servo motors. A synchronous motor’s speed is synchronized to the frequency of incoming current. A servo motor allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. The sensor on the MSK101D-0450-FN-M2-AP2-RNNN is a multiturn optical encoder. Multiturn encoders provide feedback after multiple shaft revolutions. Singleturn encoders are also available for MSK motors. Operators can select one from six types of encoders for MKS motors: three singleturn encoders and three multiturn encoders. Operators can also select from two types of holding brakes for their MSK motor. The MSK101D-0450-FN-M2-AP2-RNNN comes with a 70 Nm holding brake. The brake belongs to the category of electrically-releasing brakes.

It is a safety device designed to prevent accidental shaft rotation. The MSK101D-0450-FN-M2-AP2-RNNN motor comes in a housing with increased concentricity and run out. The motor housing is IP65 rated. This means that the motor is totally protected against dust, and safe from low-pressure water jets. The connectors for the power and feedback cables on the motor are sealed. The motor housing is also sealed. The MSK101D-0450-FN-M2-AP2-RNNN is a motor that operators can use in adverse operating environments. Its surface is painted black. The MSK101D-0450-FN-M2-AP2-RNNN has a shaft with keyway. The keyway is designed to prevent relative rotation. The shaft includes a sealing ring. The power socket is located on side A of the housing. The MSK101D-0450-FN-M2-AP2-RNNN is a liquid-cooled motor. The ambient temperature range specified by Bosch for motor operation is 0 to 40 degrees Celsius. Weight of the motor is 43.8 kilograms.