MSK101D-0450-FN-M1-BG2-NNNN

Product Description

The MSK101D-0450-FN-M1-BG2-NNNN is a Bosch servo motor. Bosch products are developed and manufactured according to the state of the art. Before they are delivered, they are inspected to ensure that they operate safely. Industrial products must only be used as intended. If they are not used as intended, situations may arise that result in personal injuries or damage to property. Bosch does not provide any warranty, assume any liability, or pay any damages for damage caused by unintended use of its products. Any risks resulting from unintended product use are the sole responsibility of the user. Personnel who handle Bosch products must read and understand the corresponding notes regarding safety and regarding the intended use. The motors must be left in their original state: no modifications to motor hardware or software are allowed.

The MSK101D-0450-FN-M1-BG2-NNNN motor is available in a standard housing. It supports several advanced features including a holding brake and an optical multiturn encoder. Multiturn encoders provide feedback after multiple shaft rotations. The electrically released holding brake is rated for 70 Nm holding torque. The shaft on the MSK101D-0450-FN-M1-BG2-NNNN motor is smooth. The shaft includes a shaft seal. The combination of a shaft seal, sealed housing, and sealed connectors provides an IP65 rating for the motor. The MSK101D-0450-FN-M1-BG2-NNNN is a liquid cooled motor. The temperature range specified by Bosch for motor operation is 0 to 40 degrees Celsius. To maintain this temperature, Bosch recommends that the coolant flow rate must not fall below two liters per minute.  The power connection on the MSK101D-0450-FN-M1-BG2-NNNN is located on side B of the housing. The combined weight of the motor and the holding brake is 43.8 kilograms.