MSK101D-0300-NN-S1-BG2-NNNN

Product Description

The Bosch MSK101D-0300-NN-S1-BG2-NNNN is a synchronous servo motor. It is called a synchronous motor because its speed is in synch with the frequency of input current. It is called a servo motor because it is part of a feedback-based closed-loop control system. The motor belongs to the MSK product line. MKS motors offer several advantages that make them ideal for high performance industrial applications. MSK motors are IP65 rated with sealed connectors and a shaft seal. MSK motors are dust-proof. The motors are also safe from low-pressure water jets. These advantages allow use of MSK motors in adverse environmental conditions. The housing of the MSK101D-0300-NN-S1-BG2-NNNN motor has a standard design. The motor cools via natural convection. The recommended ambient temperature range is 0 to 40 degrees Celsius.

The recommended maximum installation site altitude is 1000 meters. Output of the motor derates i.e. falls below rated values if either the temperature or altitude exceed specified limits. The encoder on the MSK101D-0300-NN-S1-BG2-NNNN motor is a singleturn optical device. The encoder supports the Hiperface protocol. The power connector on the motor is located on side B of the housing. The main shaft of the MSK101D-0300-NN-S1-BG2-NNNN is a plain shaft. The shaft seal prevent oil leakage from the motor. The shaft seal also prevents ingress of dust and other contaminants. Bosch has provided a holding brake on the motor. This brake operates according to the electrical release principle. Holding torque rating of the motor holding brake is 70 Nm. Voltage rating the motor holding brake is 24 Volts DC. Only trained personnel should install the motor and associated electrical and mechanical equipment. Only approved accessories should be used with the motor.