MSK101C-0450-NN-M2-AG2-RNNN

Product Description

The MSK101C-0450-NN-M2-AG2-RNNN synchronous servomotor by Bosch Rexroth has an ATEX design. This servomotor is designed to support working in explosive areas. The product should be used only as intended by the manufacturer. This device has a 101 size code. The unit installation must be carried out according to the instructions in its documentation. It must be used with a drive controller that has to be programmed before the startup. This motor operation must comply with the general safety instructions to minimize the chances of its damage. Product maintenance and repair should be performed only by qualified personnel. This device tends to have high electrical voltage because of an incorrect connection.

The motor is equipped with an optical encoder featuring an EnDat 2.1 interface. This unit also comprises an electrically releasing holding brake. It is equipped with four pole pairs. The product installation is proposed to be done at an elevation of 1000m over the sea level. This device uses the holding brake to perform a drive internal check. The unit transportation should be done at a relative air humidity of 75% at 30°C. It must be made sure that the motor is in a dry state during its transportation. This servomotor is associated with a one-year warranty.

The motor comes with sleeves and covers for protection that must remain intact on it during storage. This product features a 1K2 climatic category for storage in adherence to EN 60721-3-1 specifications. The device has to be operated without load between 800rpm to 1000rpm speed after its storage period if the bearings are over a month old. This unit and its components have a high chance of getting damaged if repeated and improper high voltage inspection tests are done on it. Its type designation is present on its type plate and in the encoder memory. This servomotor dispatch is performed by a trustworthy logistics agent team.