MSK100C-0450-NN-S1-BP0-NNNN

Product Description

The Bosch MSK100C-0450-NN-S1-BP0-NNNN is a digital servo motor. Its maximum speed is 4000 RPM. The sound pressure level of the motor is less than 75 dB. MSK motors support an optional holding brake. However the MSK100C-0450-NN-S1-BP0-NNNN does not include a holding brake. Its shipping weight is 45.1 kilograms. The MSK100C-0450-NN-S1-BP0-NNNN is a flange mounted motor and has a 165 millimeter flange. Each of the mounting holes is compatible with a M10 screw. The diameter of the motor shaft is 32 millimeters and the motor centering diameter is 130 millimeters. Approximately 60 millimeters of the motor shaft are available outside the main housing. The length of the MSK100C-0450-NN-S1-BP0-NNNN motor is 434 millimeters. The winding resistance at 20 degrees Celsius is 0.12 Ohms. The winding inductance is 1.6 millihenry. Protection class of the MSK100C-0450-NN-S1-BP0-NNNN is IP65.

The sealed housing, sealed connectors and shaft seal all contribute to this good protection rating. The motor is dust proof and is safe from low-pressure water jets. Therefore it can be used in adverse environmental conditions. The optimal temperature range for motor operation is 0 to 40 degrees Celsius. The supported cooling methods include surface cooling and natural convection. Surface cooling requires a cooling fan but delivers higher rates of heat dissipation. The MSK100C-0450-NN-S1-BP0-NNNN delivers higher output current and torque with surface cooling. The MSK100C-0450-NN-S1-BP0-NNNN supports an integrated optical singleturn encoder. The encoder supports Hiperface. The socket for the electrical power cable is on side B. Improper use of the motor can lead to injury and equipment damage. Only qualified personnel should plan and execute motor installation. Relevant safety instructions are included in the product documentation: these should be read and implemented.