MSK100C-0450-NN-M2-LP0-RNNN

Product Description

The MSK100C-0450-NN-M2-LP0-RNNN synchronous servomotor by Bosch Rexroth features increased runout and concentricity as per DIN 42955 specifications. This motor comprises a shaft with a keyway. The product must at all times be kept in its original state without any structural modifications. The device is intended to be used only with accessories provided by the manufacturer. The unit is capable of performing the application-specific functions only if the connected drive controller has been programmed before startup. Its cooling time is approximately five times the value of its thermal constant. This product is to be dismounted only after its pressure has been relieved. The device cannot be utilized without being grounded.

The motor is intended to be repaired and serviced only by an authorized team. The product should comprise securely tightened connectors during its operation. The device is free of a holding brake. This unit can get overloaded when its temperature reaches very high. It is essential to do an acceptance test whenever the motor is changed. This product has a low relative air humidity of 5%. The device installation is supposed to be done only after its marking has been done accordingly and sufficiently high protection class. The unit is CSA Certified and UL Listed. The servomotor with a one-year warranty is shipped through a trustworthy logistics network.

The product has four pole pairs. The device is integrated with an encoder that has a supply voltage of 3.6V to 14V. The unit encompasses a B5 frame size as per EN60034-7 specifications. Its shaft has a 10x8x45 key and a DS M10 centering hole as per DIN 332 Part 2 specifications. The motor can be fitted with gearboxes that comply with ex-protection demands in accordance with EG 94/9 directives. This product makes use of circular connectors for its power and encoder connections. The device is meant to be connected only in the de-energized state.