MSK100C-0450-NN-M2-AP2-RNNN

Product Description

The MSK100C-0450-NN-M2-AP2-RNNN synchronous servomotor from Bosch Rexroth has to be operated along with the manufacturer’s drive controller. This motor belongs to the MSK product group of offerings. The product is intended to be put into operation in potentially explosive areas. The device houses an optical encoder system, an output shaft and a holding brake. The unit must be used only after reading the associated safety and usage instructions. It can be used in Zone 2 and Zone 22 atmospheres. The motor housing tends to become very hot housing when in use. The product has the capability of triggering dangerous drive movements due to inappropriate use.

The device must be grounded properly before it is put to use. The unit can be installed in any direction. Its components and accessories comply with the EU/2014/34 directives. The motor supports operation at a maximum temperature of 55°C. The product poses a danger of explosion as a result of an exalted tensile load of its connection cables. The device has to be free of corrosion on its housing all the time. The unit utilizes the holding brake in standstill mode to perform a drive internal check. It must be subject to an acceptance test every time it is changed. This MSK100C-0450-NN-M2-AP2-RNNN servomotor has a one-year warranty.

The motor cannot be used in any area where there is a chance of permanent occurrence of explosive materials or atmosphere. The product is likely to have a high temperature when it is overloaded. This device uses an encoder with an EnDat 2.1 interface. The unit features the Class 3K4 climatic category for operation. It experiences a temperature change rate of 0.5°C/min. The motor encounters vibrations in the form of sinewave oscillations in stationary use. This product supports a maximum allowed vibration load of 10m/s². The device has IP 65 degree of protection. It is possible to deliver this servomotor to any worldwide destination.