MSK100C-0300-NN-S3-BP0-NNNN

Product Description

The MSK100C-0300-NN-S3-BP0-NNNN is an industrial servo motor. Bosch has designed the motor for high-performance applications. The motor housing is sealed. The cable connectors on the motor are also sealed. The MSK100C-0300-NN-S3-BP0-NNNN has a shaft with a keyway and a seal as per DIN 6885-1. The combination of sealed motor housing and other elements gives the motor an IP65 ingress protection rating. This is an excellent rating and allows operators to use the motor in adverse operating conditions. The motor operates with rated data as long as the site elevation is less than 1000 meters (3280 feet) and the ambient temperature is between 0 and 40 degrees Celsius. Motor operation outside these specified limits leads to output derating. Rated speed of the MSK100C-0300-NN-S3-BP0-NNNN motor is 4500 RPM. Sound level of the operating motor is less than 75 dB.

The cooling method used for heat dissipation depends on the operating requirements. The MSK100C-0300-NN-S3-BP0-NNNN supports both natural convection and surface cooling. When used with natural convection at 60K overtemperature, the continuous torque is 38 Nm and the continuous current is 21.6 Amps. When used with natural convection at 100K overtemperature, the continuous torque is 43.5 Nm and the continuous current is 27 Amps. When used with surface cooling, the continuous torque is 57 Nm and the continuous current is 32.4 Amps. The MSK100C-0300-NN-S3-BP0-NNNN features an integrated capacitive singleturn encoder. This encoder supports the Hiperface protocol and is rated for 16 signal periods. The socket for the electrical connection is on side B of the housing. MSK motors support an optional holding brake. However the brake is not available on the MSK100C-0300-NN-S3-BP0-NNNN motor. Only qualified personnel should work on the MSK100C-0300-NN-S3-BP0-NNNN motor.