MSK100B-0450-NN-S1-LG1-NNNN

Product Description

The MSK100B-0450-NN-S1-LG1-NNNN synchronous servomotor from Bosch Rexroth can be operated in potentially explosive areas. This motor cannot be used without incorporating a drive controller. The product has an optical encoder system, an output shaft with a keyway and a holding brake. This device belongs to the MSK product group of such offerings. The unit must be put to use only as intended by its manufacturer. It can be used in Zone 2 and Zone 22 atmospheres. The motor should not be used in areas where an explosive atmosphere gets triggered during normal operation. This product installation and operation are to be done only after reading the associated documentation.

The device has a very hot housing during operation. This unit can cause its drive controller to move dangerously due to faulty control. It cannot be operated before establishing a proper grounding connection. The motor needs to be disconnected from electric power when it is kept under storage. This product handling and mounting must be done using appropriate lifting tools and equipment. The device must neither be opened nor disconnected in the pressurized state. This unit can operate at a maximum temperature of 55°C. It must not have any corrosion on its surface. This MSK100B-0450-NN-S1-LG1-NNNN servomotor has a one-year warranty.

The motor functioning should take place only within the specified ambient conditions. This product can utilize its holding brake in standstill mode in normal operation. The device must undergo an acceptance test every time it is changed. This unit tends to have a dust layer on its surface when operating in an explosive dust-laden atmosphere. It is UL Listed and CSA Certified. The motor encoder comprises an encoder with a Hiperface interface and 4,096 mechanical rotations. This product is balanced with a complete key. The device is equipped with a flange designed as per DIN 42955 specifications. This servomotor can be shipped to any destination of your choice.