Product Description
The MSK100B-0400-NN-S2-BP2-RNNN synchronous servomotor has the connector for the electrical connection directed to the B side. This Bosch Rexroth motor portrays increased concentricity quality. The product renders maintenance-free operation when it is used within the indicated ambient conditions. This device needs to be cooled down before maintenance work is done on it. The unit is capable of depicting undesirable consequences due to insufficient heat dissipation. Its bearings have a lifespan of 30,000 operating hours as per ISO 281 specifications. The motor design supports installation in only industrial machinery. The product needs a periodic check to be done for damaged connection cables that have to be replaced.
This device might experience combustion through its hot surface if the temperature crosses 100°C. The unit will not run if its holding brake is not released. It should be secured against falling before its disassembly is done. The motor features components made of magnetic materials and metals like brass, steel, copper and aluminum. This three-phase product needs to be left in its original state without any modification. The device must never be made to operate directly on a single-phase or three-phase network. This unit operation is permitted only in the explicitly mention combination and configuration of components.
Motor operation underwater is prohibited at any point in time. Its utilization or load factors must be multiplied when the ideal operating conditions are exceeded. The product is meant to be connected with cables provided by the manufacturer. This device can stimulate dangerous drive controller movements due to faulty control. The unit operation even for a brief while is not allowed without the secure connection of the protective conductor to its component points. Its connectors cannot be connected or disconnected under voltage. This motor with a warranty for one year is delivered through reputed freight carriers with an international network.