MSK100B-0400-NN-S2-AP0-RNNN

Product Description

The MSK100B-0400-NN-S2-AP0-RNNN synchronous servomotor from Bosch Rexroth supports operation in potentially explosive areas. This motor is one of the several MSK product groups of such offerings from the manufacturer. The product cannot be used without a drive controller. This device should be put to use only as intended. The unit is likely to cause property damage if it is used inappropriately. It is integrated with an optical encoder system and a keyway shaft. The motor is meant for use in Zone 2 and Zone 22 atmospheres. This product can be installed in any orientation. The device functions with derated data between 45°C and 55°C.

The motor service and repair operation is permitted by only the manufacturer’s authorized team. This unit requires mechanical fastening of its cable ends. It has to be grounded properly using a motor cable. The product does not have any holding brake. This device must undergo an acceptance test after a replacement has been made. The unit is not to be operated in an area where there is a possibility of an explosive atmosphere for a long period. Its design is done according to IP 65 degree of protection as per EN 60034 specifications. This MSK100B-0400-NN-S2-AP0-RNNN motor has a one-year warranty.

The product depicts a very hot housing during and soon after operation. This device encounters radial as well as axial forces while working. The unit operation has to be carried out only after reading the associated documentation. Its drive controller needs to be programmed prior to startup for the motor to perform the application-specific functions. The motor must never be touched as soon as it is switched OFF. This product tends to trigger dangerous movements of the drive controller because of faulty control. The device storage and transportation should not be done in a vertical orientation. This motor shipping can be done to any international destination of your choice.