MSK100B-0400-NN-M1-AP1-NNNN

Product Description

The MSK100B-0400-NN-M1-AP1-NNNN synchronous servomotor produced by Bosch Rexroth is grounded with a motor cable. This motor uses its holding brake in standstill mode to perform a drive-internal check. The product is subject to a unit test as per EN 60079-15 specifications after repair if there is a change in its explosion protection properties. The device might explode due to a high temperature because of overloading. The unit is RoHS Compliant and CSA Certified. Its parts can have a temperature of 155°C at the maximum permitted operating temperature during normal operation. The motor portrays IP 65 protection rating. This product features a radial shaft sealing ring fitting that is similar to an abrasive seal on its shaft.

The device features 155 thermal class in accordance with EN 60034-1 specifications. The unit incorporates the electrically releasing action for the holding brake. It must have sufficient counterbalancing for its vertical axis to prevent them from falling off after the motor power supply is turned OFF. The motor surface after or during operation is to be touched only after wearing the relevant safety accessories such as gloves. The product must neither be disconnected nor opened in the energized state. This device comprises an inlet and an outlet for flushing.

The motor operates with rated data between 0°C and 40°C. The unit is likely to depict ignition sparks with the connection or disconnection of connectors under load. Its protective conductor connections must be free of moisture, corrosion and dirt. The product can activate the holding brake when it is running only when there is a fault in the related system. The device is not suitable for use in areas where an explosive atmosphere occurs for a long period. This unit is to be done only after ensuring that its type plate has been marked accordingly. This MSK100B-0400-NN-M1-AP1-NNNN motor is delivered internationally with its one-year backup support.