MSK100B-0300-NN-S1-UP0-NNNN

Product Description

The Bosch MSK100B-0300-NN-S1-UP0-NNNN is a MSK series synchronous servo motor. The MSK motor series is characterized a wide performance spectrum and fine size gradation. The high torque density of these synchronous servo motors enables a compact design with a maximum torque of up to 631 Nm. Depending on the required accuracy, you can choose between encoder systems with low, medium or high resolution. All encoder variants are available in single-turn or multi-turn versions. With numerous other options, MSK motors can be upgraded and matched to the desired requirements. The MSK series is suitable for applications that go beyond the classic areas of application for servo motors. In addition to the various encoder systems, numerous other options such as keyway, holding brake and increased concentricity accuracy can be selected. Fan units for axial and radial mounting are available for applications with increased continuous performance.

The MSK100B-0300-NN-S1-UP0-NNNN is a servo motor with a standard IP65 rated housing. The encoder on the motor is a singleturn optical device with Hiperface support. The encoder is rated for 128 signal periods. The motor shaft includes a keyway. The shaft also includes a seal that protects motor bearings and therefore improves motor performance over its operating lifespan. The MSK100B-0300-NN-S1-UP0-NNNN motor is not equipped with a holding brake. The specified temperature for motor operation is 0 to 40 degrees Celsius. Under normal load conditions, operators can use the motor with convection cooling. Under increased load conditions, operators can use the motor with surface cooling. The moment of inertia of the rotor on the MSK100B-0300-NN-S1-UP0-NNNN is 0.01920 kg m². The motor weighs approximately 34 kilograms. The housing of the MSK100B-0300-NN-S1-UP0-NNNN motor is painted black.