MSK100B-0300-NN-M1-AG1-NNNN

Product Description

The Bosch Rexroth MSK100B-0300-NN-M1-AG1-NNNN synchronous servomotor encompasses a 32Nm holding brake. The servomotor has four pole pairs. The product must not undergo a high-voltage test by its customers. The device type plate helps in its identification and procuring spare parts when there is a failure. The unit can cause injury if it is handled improperly during transport. Its protection, sleeves as well as covers, should be removed only just before installation. Motor transportation should never be done vertically by lifting it using the shaft. This product poses less risk of damage and accidents when it is worked on with maximum care.

The device operation is to be undertaken only by personnel qualified or authorized to switch circuits ON and OFF. The unit requires the use of washers and screws mentioned by the manufacturer for safe attachment to the machine. It must be ascertained that the bolted connections for mounting the flange can withstand the weight force of the motor. This motor mounting should be done without any damage to the holder present on the system side. The product is connected with cables that have extreme resistance and load capability. The device repair must be undertaken after confirming that its parts with residual voltage are discharged completely. This servomotor has a backup support period for a year from Wake Industrial.

The product has a fixed output direction for its encoder connector. The device shutdown can be done only after the main switch of its machine is switched OFF. The unit might need regular preventive maintenance measures to be followed when it functions under unfavorable conditions. The motor may take a maximum of 140 minutes to cool down after operation. This product has 95% high relative air humidity during operation. The device’s functionality might be affected due to dirt and dust. Its transportation can be done to any country across the globe.