MSK100B-0200-NN-S1-LP0-NNNN

Product Description

Bosch Rexroth continues to set the benchmark for product development with a wide range of products, including synchronous motors, spindle motors, drive controllers, frequency converters, drive converters, power supply modules, brake choppers, and inverter modules.

The MSK100B-0200-NN-S1-LP0-NNNN model has a single turn absolute hiperface encoder and winding resistance of 0.58 ohms. At 60K, the motor generates 28 Nm of constant torque while using 14.7 A of continuous current. The voltage constant of the model is 129.5 V/min^-1, while the torque constant is 2.10 Nm/A. The MSK100B synchronous motor features a left-side power connection and a keyway-equipped output shaft. The motor has an IP65 protection certification against dust and water and an insulation class of 155. The maximum speed of the motor is 4100 rpm, and the maximum torque output is 102 Nm. The model consists of four polar pairs and a 40-minute thermal time constant, corresponding to the time necessary for the motor to cool down naturally. The MSK100B synchronous motor has an inductance of 7,600 mH and weighs 34 kilograms. At a temperature of 100 K, the model develops a constant torque of 33 Nm and uses a continuous current of 17.3 A.

The model MSK100B-0200-NN-S1-LP0-NNNN must be moved between -20 and +80 degrees Celsius, and it cannot be placed more than 1,000 meters above sea level. The model must only be used as intended and between 0 and +40 degrees Celsius. Strong oscillations have been suggested to diminish motor efficiency; thus, the motor must be mounted with care. Use only the specified attachments and accessories. This synchronous motor (MSK100B-0200-NN-S1-LP0-NNNN) is covered by a one-year replacement warranty from Wake Industrial. In the case of a defect, the warranty may be quickly asserted.