MSK100B-0200-NN-M2-LP0-RNNN

Product Description

The MSK100B-0200-NN-M2-LP0-RNNN synchronous servomotor manufactured by Bosch Rexroth does not have any holding brake. This motor has a size code of 100. The product must operate with a drive controller from only the same manufacturer. The device incorporates an optical encoder with 2,048 signal periods. The unit must undergo an acceptance test whenever it is changed or before the first startup of the associated system. It should not be used in areas where an explosive atmosphere can occur because of typical error states or frequent malfunctions. The motor is UL Listed and CSA Certified. The product depicts a B5 frame size as per EN 60034-7 specifications.

The device incorporates a keyway shaft with a cylindrical shaft end DS M10 centering hole. This unit has an overall length of 368mm. Its encoder helps the drive controller to control the motor speed and position it based on the current motor position. The motor supports the mounting of gearboxes that adhere to the Ex-protection demands as per EG 94/9 directives. The product uses circular connectors for its power and encoder electrical connections. The device has a rotatable plug connector for its flange socket. The unit connection and disconnection must take place only in the de-energized state.

The product features the Class 3K4 climatic category for operation. The device supports 5% low relative air humidity during operation in compliance with DIN EN 60721-3-3 specifications. The unit can withstand a maximum vibration load of 10m/s². It has IP 65 degrees of protection for its housing and output shaft. This motor installation can be carried out in any orientation. The product is characterized by a black RAL 9005 prime black coat on its housing. This device uses a keyway shaft that is designed based on DIN 6885, Part 1 specifications. The synchronous motor has one-year backup support and is dispatched all over the globe.