MSK100A-0450-NN-M1-AP1-NNNN

Product Description

Bosch Rexroth likewise provides power supply modules, brake choppers, and analog amplifier cards in addition to synchronous, linear, spindle, and asynchronous motors. The organization routinely exceeds standards of excellence.

The MSK100A-0450-NN-M1-AP1-NNNN model has a position-tracking multi-turn hiperface optical encoder and a torque-transferring plain output shaft. The motor has four polar pairs and a decibel level of less than 75. This 23-kilogram MSK100A synchronous motor is used in several automated applications. The motor generates 17 Nm of continuous torque at 100K, as opposed to 15 Nm at 60K. The model must be connected with a drive controller and firmly fitted into the chosen machine for the best performance. This type's maximum rotating speed is 6000 revolutions per minute, and its power connector is located on the housing's A-side. Due to the use of permanent magnets in the design of the rotor, the moment of inertia of the model is 0.01100 kgm². The thermal time constant of the surface cooling system of the motor housing is 39 minutes. The insulation class rating for the MSK100A synchronous motor is 155, and it has an IP65 certification. The first number of the protection grade indicates resistance to dust, while the second indicates resistance to liquids.

The model MSK100A-0450-NN-M1-AP1-NNNN contains a holding brake having a holding torque of 32 Nm and a weight of 1.1 kilograms. A temperature sensor is included to minimize overheating and optimize power ratings. This motor has maximum and continuous torque ratings of 54 Nm and 22.5 Nm, respectively. The synchronous motor's winding inductance and winding resistance are 0.81 ohms and 7.8 mH, respectively. The model requires careful handling and operation between 0 and +40 degrees Celsius. In the very improbable event that this synchronous motor (MSK100A-0450-NN-M1-AP1-NNNN) develops a defect, you can depend on Wake Industrial's product warranty.