MSK100A-0300-NN-S1-BP0-NNNN

Product Description

Bosch Rexroth is at the leading edge of product innovation because of its extensive selection of efficient and cost-effective electrical and mechanical components. Some of the commonly used products include synchronous motors, spindle motors, drive converters, digital axis controllers, power supply modules, analog amplifier cards, and inverter modules.

The MSK100A-0300-NN-S1-BP0-NNNN model is suitable for use in dusty or wet environments due to its IP65 rating and insulation class of 155. A sealing ring is positioned above a synchronous motor's output shaft (keyways) to protect it from lubricants. The maximum speed and torque output of the MSK100A synchronous motor are respectively 5200 rpm and 54 Nm. The working temperature range for this synchronous motor is 0 to +40 degrees Celsius. The authorized temperature range for shipping this synchronous motor is -20 to +80 degrees Celsius, and the acceptable maximum installation height is 1,000 meters above mean sea level. Due to intense oscillations, the motor's effectiveness has diminished; as a result, the motor must be installed with great care using the right accessories and attachments. The MSK100A synchronous motor includes a single-turn-turn hiperface encoder for rotor monitoring and generates 17 Nm of continuous torque at 100 K while using 11.6 A of constant current.

The model MSK100A-0300-NN-S1-BP0-NNNN has an electrical connection on the B side of its housing and cannot work without a drive controller. The synchronous motor has four polar pairs and a thermal time constant of 39 minutes, which is the time necessary for the surface cooling of the motor. During surface cooling at a standstill operation, the motor (MSK100A-0300-NN-S1-BP0-NNNN) delivers a high constant torque of 22.5 Nm while using a low constant current of 15.3 A.