Wake Industrial LLC is not an authorized distributor of this product.

MSK075E-0450-NN-M1-UG0-NNNN

  • Rated 4.7 (16 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911336021
  • Unused Original Box Pricing Available!

Current response time:

3 Minutes 5 Seconds

The MSK075E-0450-NN-M1-UG0-NNNN synchronous servomotor by Bosch Rexroth uses a multi-turn absolute encoder with 16 signal periods. This servomotor has a KTY84 temperature monitoring sensor that causes automatic shutdown when the surface temperature is 150 °C. It should not be lifted using the output shaft. The motor installation is to be done only in industrial machinery.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The MSK075E-0450-NN-M1-UG0-NNNN synchronous servomotor manufactured by Bosch Rexroth cannot be used with any drive controller from third-party manufacturers. This servomotor can operate at a maximum temperature of 55°C. The product portrays an IP 65 degree of protection as per EN 60034-1 specifications. This device houses a multiturn absolute encoder. The device poses risks of explosion hazards due to improper handling during the connections. The unit portrays a standard design. Its connection cables should neither be loaded with tension nor torsion. This motor supports a maximum installation elevation of 3000m over sea level. The product portrays the 3K4 climatic category during operation for its permanent use.

This device tends to have vibrations in the form of sine-wave oscillations in stationary use. The unit encounters an axial load of 10m/s2. It can be installed both horizontally and vertically. The motor cannot have an additional varnish on its housing surface. This product incorporates a plain shaft with a very quiet running action. The device comprises a radial shaft sealing ring as per DIN 3760 – Version A specifications around the shaft. This unit is free of any holding brake. Its acting radial force can never be the maximum allowed radial force. This servomotor features one-year backup support.

The motor must have no liquid accumulation around its shaft. This product can be fitted with drive elements like pinions and couplings on its shaft. The device is fitted with a fixed bearing on the B side. This unit features a 240° rotatable plug for its power connection. Its vertical axes must be mechanically locked to secure them against sinking or dropping after switching the motor off. The motor is cooled by natural convection. This product has a KTY84 temperature sensor in its windings. The device comprises an isolation system with a high dielectric load. This unit transportation is meant to be done between -20°C and 80°C. This servomotor dispatch is done worldwide.

  • MSK075E0450NNM1UG0NNNN
  • MSK075E 0450 NN M1 UG0 NNNN
  • MSK-075E-0450-NN-M1-UG0-NNNN
  • MSK75E-0450-NN-M1-UG0-NNNN

MSK075E-0450-NN-M1-UG0-NNNN Technical Specifications

Continuous Current at Standstill 100 K: 15.6 A
Continuous Torque at Standstill 100 K: 23.0 Nm
Maximum Current: 63.9 A
Maximum Torque: 88.0 Nm
Winding Inductivity: 4,460 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo