MSK075D-0450-NN-M2-UP0-RNNN

Product Description

The MSK motors are designed with a special focus on quality control. They are manufactured by Bosch Rexroth and are some of the most reliable speed and position control motors on the market. The MSK075D-0450-NN-M2-UP0-RNNN is no exception to this rule. The motor has been developed to provide high torque. In addition, it features a liquid cooling mechanism, and its windings code is 450. The frame size is 075, and the length of the motor is designated D.

The MSK075D-0450-NN-M2-UP0-RNNN synchronous motor is also equipped with an Optical encoder: Multiturn absolute EnDat 2.1, which allows for more precise control over speed and position. The system's exceptional dynamic characteristics make it applicable in situations with varying loading conditions. This motor has a constant output torque of 17.0 Nm when it is operating at a temperature of 60 K. At this temperature, the motor has a value of 16.5 A for the constant current that it draws. The values for constant current and constant torque at a temperature of 100K are 18.0 Amps and 18.5 Nm, respectively. The maximum torque produced by the motor is 64 Newton meters when it is drawing a maximum current of 74.3 amperes.

The exterior shell of the motor, which has been developed following the requirements of the IP 65 standard, offers protection against the penetration of water and non-corrosive substances, such as oils and emulsions. In addition, the MSK075D-0450-NN-M2-UP0-RNNN features a built-in sensor that monitors the thermal characteristics of the motor and serves as a safety mechanism if the temperature of the motor reaches an unsafe level. The rotor inertia of this motor is significantly lower than the rotor inertia of most other motors, which enables it to function correctly during start-stop operations while running at high speeds.