MSK075C-0300-NN-S2-UG1-RNNN

Product Description

Bosch Rexroth is famous for producing competitively cost, high-quality goods. Consequently, the company has established itself as a dependable partner in the motion control industry.

The MSK075C-0300-NN-S2-UG1-RNNN model is equipped with an internal temperature sensor to prevent overheating and an absolute single-turn EnDat2.1 encoder for shaft speed and route identification. The model must be installed and maintained within a temperature range of -20 to +80 degrees Celsius by a qualified technician. The holding brake of the MSK075C synchronous motor has a holding torque of 23 Nm with connection and disconnection times of 130 and 180 ms, respectively. Throughout surface cooling, the motor provides a constant 18 Nm of torque while using a low 12.6 A of continuous current. The model weighs 14.8 kilograms and has an inertia moment of 0.0035 kgm² due to the use of permanent magnets. The model has a thermal time constant of 29 minutes and significantly improves thermal diffusion through surface cooling. To prevent vibrations, the motor must be securely attached to the intended machine, and for optimal performance, it must be connected to the drive controller that it was designed for. On the plain simple output shaft of this high-performance MSK075C synchronous motor, a high-quality sealing ring is installed to prevent lubricants from entering.

The model MSK075C-0300-NN-S2-UG1-RNNN is rated for a continuous torque output of 12.5 Nm at 100 K and 12 Nm at 60 K. The synchronous motor's black-painted outside housing was designed to meet IP 65 protection standards and an insulation rating of 155. This indicates the existence of a barrier against high-pressure water, lubricants, emulsifiers, and noncorrosive substances. This motor (MSK075C-0300-NN-S2-UG1-RNNN) operates at temperatures between 0 and +40 degrees Celsius.