MSK071E-0450-FN-S1-UP2-NNNN

Product Description

The MSK071E-0450-FN-S1-UP2-NNNN is a state-of-the-art industrial servo motor produced by highly trained engineers of the reputable Rexroth Indramat according to internationally accepted quality standards. This industrial motor is designed according to the IP65 protection class, its housing unit features a compact design, and the housing is also covered with a black 2K epoxy resin coating. The motor coating is based on epoxy polyamine resin in water, it offers the motor complete chemical resistance against water, sewage, current mineral oils, diluted acids, and seawater. The motor coating also provides partial protection against organic solvents and hydraulic oil. To increase the degree of protection provided by this motor’s coating, an additional layer of varnish can be applied to the motor, however, this additional layer must not exceed 40 millimeters in thickness.

The MSK071E-0450-FN-S1-UP2-NNNN industrial motor sends the kinetic energy it generates to industrial machines through a steel output shaft designed to support high loads, this output shaft can be connected to an electrically releasing holding break which will help to retain the load connected to the motor’s output shaft when the motor is at a standstill. The permissible air temperature suitable for the operation of this industrial motor falls between 0 to about 40 degrees Celsius, also the relative air humidity suitable for the operation of this industrial motor falls between 5 to about 85 percent.

The MSK071E-0450-FN-S1-UP2-NNNN industrial motor is supplied with a flange that makes the installation of the motor according to the IM B5, IM V1, and IM V3 mounting design possible. The continuous input current required by this industrial motor for operation falls between 20 to about 24.4 amperes, at this current the motor generates an output torque of 23-newton meters. Also, the maximum speed of this industrial motor is about 6000 revolutions per minute.